Schedule - Revision history

Trackinfo at 21:20, 8 August 2026

2026-08-08T21:20:37Z

@@ Line 5: / Line 5: @@
 It takes the events, divisions, participant estimates, rounds, facility information, and meet settings already entered elsewhere in Torunit and turns them into a timed competition schedule.
-For a multi-day meet, you will be directed to use the [[Macro Scheduler]] and [[Micro/Daily Scheduler]] instead.  If you have an event using [[Rounds]] you will have passed through that menu.  Otherwise you should have arrived on Schedule after entering your [[Participants]] estimates upon which the schedule will be built.
+If you had checked this meet being a multi-day meet, you would be directed to use the [[Macro Scheduler]] and [[Micro/Daily Scheduler]] instead.  If you have an event using [[Rounds]] you will have passed through that menu.  Otherwise you should have arrived on Schedule after entering your [[Participants]] estimates upon which the schedule will be built.  Ifou didn't put any numbers there, go back and give us something to work with.
 == One schedule, not a separate copy ==

Trackinfo at 21:09, 8 August 2026

2026-08-08T21:09:37Z

← Older revision		Revision as of 21:09, 8 August 2026
Line 5:		Line 5:
	It takes the events, divisions, participant estimates, rounds, facility information, and meet settings already entered elsewhere in Torunit and turns them into a timed competition schedule.		It takes the events, divisions, participant estimates, rounds, facility information, and meet settings already entered elsewhere in Torunit and turns them into a timed competition schedule.

	For a multi-day meet, use the [[Macro Scheduler]] and [[Micro/Daily Scheduler]] instead.		For a multi-day meet, you will be directed to use the [[Macro Scheduler]] and [[Micro/Daily Scheduler]] instead. If you have an event using [[Rounds]] you will have passed through that menu. Otherwise you should have arrived on Schedule after entering your [[Participants]] estimates upon which the schedule will be built.

	== Who should use this page? ==		== Who should use this page? ==

Trackinfo at 20:35, 8 August 2026

2026-08-08T20:35:53Z

@@ Line 452: / Line 452: @@
 * Confirm that changing ANTICIPATED/REAL, heat gap, or field-flight policy preserves human placement while correctly rebuilding dependent calculations.
 * Remove remaining internal “Schedule4” terminology from user-facing titles, comments, or labels where it escapes into the interface. The manual and public product name are simply '''Schedule'''.
 == See also ==

Trackinfo: /* Who should use this page? */

2026-08-07T10:19:43Z

Who should use this page?

← Older revision		Revision as of 10:19, 7 August 2026
Line 13:		Line 13:
	Before building the schedule, the Meet Director should normally have completed:		Before building the schedule, the Meet Director should normally have completed:

	* [[Create Meet]]		* [[Create-Meet]]
	* [[Venue]]		* [[Venue]]
	* [[Participants]]		* [[Participants]]

Trackinfo: Created page with "{{DISPLAYTITLE:Schedule}} The '''Schedule''' page creates and manages the operational schedule for a one-day meet. It takes the events, divisions, participant estimates, rounds, facility information, and meet settings already entered elsewhere in Torunit and turns them into a timed competition schedule. For a multi-day meet, use the Macro Scheduler and Micro/Daily Scheduler instead. == Who should use this page? == Use the Schedule page for a one-day meet. B..."

2026-08-07T10:19:23Z

Created page with "{{DISPLAYTITLE:Schedule}} The '''Schedule''' page creates and manages the operational schedule for a one-day meet. It takes the events, divisions, participant estimates, rounds, facility information, and meet settings already entered elsewhere in Torunit and turns them into a timed competition schedule. For a multi-day meet, use the Macro Scheduler and Micro/Daily Scheduler instead. == Who should use this page? == Use the Schedule page for a one-day meet. B..."

New page

{{DISPLAYTITLE:Schedule}}

The '''Schedule''' page creates and manages the operational schedule for a one-day meet.

It takes the events, divisions, participant estimates, rounds, facility information, and meet settings already entered elsewhere in Torunit and turns them into a timed competition schedule.

For a multi-day meet, use the [[Macro Scheduler]] and [[Micro/Daily Scheduler]] instead.

== Who should use this page? ==

Use the Schedule page for a one-day meet.

Before building the schedule, the Meet Director should normally have completed:

* [[Create Meet]]
* [[Venue]]
* [[Participants]]
* [[Rounds]], if the meet uses qualifying rounds

The Schedule page is where those planning decisions become actual competition times.

== One schedule, not a separate copy ==

Torunit treats the schedule as one live operational state.

Changes made to event times, facilities, heat structure, or other schedule information are intended to update the same underlying schedule used by later operational and public systems.

The Meet Director should therefore treat changes on this page as changes to the meet's actual working schedule.

== Meet-level timing settings ==

The top of the page contains settings that affect the entire one-day schedule.

These are not merely display preferences. Several of them change the calculations used to generate the schedule.

=== Track start ===

Enter the competition time of the first track event.

If no track start time has been provided, Torunit currently defaults the timeline to 9:00.

The Track start box may be highlighted to remind the Meet Director that the displayed time is only a default.

Changing the Track start causes the track schedule to be recalculated from the new starting point.

=== Field start ===

Enter the time at which field competition begins.

Track and field competition may begin at different times.

If no field start is entered, Torunit currently uses a default starting time.

=== Heat gap ===

Sets the standard amount of time between track heats.

The value may be entered in quarter-minute increments.

Examples:

* <code>4</code> = 4 minutes
* <code>1.5</code> = 1 minute 30 seconds
* <code>0.75</code> = 45 seconds
* <code>0.25</code> = 15 seconds

The Heat gap setting is the same meet-wide value used on the [[Rounds]] page.

Changing it in either location changes the same underlying setting.

Changing Heat gap may cause schedule blocks to be regenerated.

=== Hurdle transition ===

Sets the standard amount of time allowed for hurdle setup or configuration changes.

This is intended to account for operational work such as:

* Moving hurdles
* Changing hurdle heights
* Changing spacing or configuration
* Clearing or resetting the track

Torunit may also use event-specific hurdle information when calculating the actual hurdle lifecycle.

=== Recall warm-up ===

Sets the time given to field-event athletes who must be recalled from an earlier flight for additional attempts.

This is particularly relevant when finalists are drawn from more than one earlier flight.

If the final qualifying athletes come entirely from the last flight, a recall warm-up may not be necessary.

=== Field flights ===

Controls the general field-event flight seeding policy.

Current choices are represented as:

* '''Balanced'''
* '''Stacked'''

==== Balanced ====

Strong marks are distributed among the flights.

This may provide a more balanced competition structure and is appropriate where flights should be treated comparably.

==== Stacked ====

Stronger marks are weighted toward the later flight.

This may be useful in a one-day final where the Meet Director wants the leading athletes competing late and wishes to reduce the need to recall athletes from an earlier flight for the final attempts.

=== Auto-ripple ===

Controls whether later events automatically move when an earlier event changes.

When Auto-ripple is '''ON''', each facility behaves as a flowing timeline.

If an event moves later, dependent events following it may also move later.

If time is gained, later events may move earlier where permitted.

A fixed or pinned event remains an anchor.

Explicit Meet Director decisions should remain authoritative; ripple applies to the dependent schedule that follows those decisions.

=== Heat sizing ===

Controls whether heat counts are based on:

* '''ANTICIPATED'''
* '''REAL'''

==== ANTICIPATED ====

Uses the planning counts entered before registration is complete.

This allows the Meet Director to build a stable preliminary schedule even while real registrations are still arriving.

==== REAL ====

Uses actual current registration counts.

Switch to REAL when entries are sufficiently complete that the Meet Director wants the operational schedule based on the athletes actually entered.

Changing Heat sizing may regenerate the blocks.

== Fixed schedule ==

The '''Fixed''' setting indicates whether the day's schedule should behave as a fixed-time schedule rather than a freely flowing schedule.

A fixed or pinned start serves as an anchor.

Torunit should not silently move a human-established fixed time merely because an earlier event is running long.

If a fixed start becomes impossible, the conflict should be shown rather than silently changing the fixed decision.

== First call ==

Sets how many minutes before competition Torunit should consider the first call for an event.

Example:

<code>30 minutes</code>

means the first call is scheduled 30 minutes before the relevant competition time.

== Check-in ==

Sets the standard advance time for check-in.

The exact operational use may differ by event and later check-in procedures.

== Warmup ==

Sets the standard warm-up allowance associated with field-event scheduling.

Field facilities must have enough time to clear the previous competition and prepare the next group.

== Overview ==

The '''Overview''' view presents the one-day schedule in two primary columns:

* Track
* Field

This is the simplest overall view of the day's competition.

Each scheduled block may show information including:

* Event
* Round
* Gender/division composition
* Number of athletes
* Number of heats or flights
* Scheduled start
* Duration
* Facility
* Combined-event relationship
* Hurdle or implement information
* Warnings

== Track ==

The Track column contains scheduled running events.

Events are sized according to the applicable participant counts, lane or heat capacity, and round plan.

The visible event name may also identify its competition round, such as:

* Prelims
* Semifinals
* Final

== Field ==

The Field column contains field-event competition blocks.

Field blocks may contain one or more flights.

Their duration may incorporate:

* Warm-up
* Competition time
* Flight structure
* Final-attempt cuts
* Recall warm-up

== Start times ==

Individual block start times may be edited.

Changing a start time establishes that block as the current anchor for the affected schedule sequence.

Where ripple is enabled, dependent events after that block are recalculated from the new time.

The corresponding block in other Schedule views should reflect the same change.

== Pin marker ==

A manually established start may be shown with a pin marker:

'''📌'''

A pinned start represents an explicit schedule decision.

Dependent later events may move around it, but Torunit should not silently replace the pinned time.

== Facilities view ==

Select '''⊞ Facilities''' to view field competition by physical facility rather than simply as one Field column.

Each configured pit, ring, runway, or other field facility receives its own timeline.

Examples may include:

* HJ North
* HJ South
* PV Pit
* Shot North
* Shot South
* Cage
* Javelin Sector

The facilities originate from the physical resources configured on [[Venue]].

== Facility collisions ==

A facility can ordinarily conduct only one competition at a time.

Torunit marks a facility when two scheduled blocks overlap.

Current indicators include:

* '''clear'''
* '''empty'''
* A red collision warning

A collision means the Meet Director should adjust timing or facility assignment.

== Moving a field event to another facility ==

In Facilities view, a field-event block may be dragged to another compatible facility.

This changes the block's operational facility assignment.

The Overview and Facilities views are intended to represent the same schedule, so the corresponding block should remain synchronized.

== Editing a facility start time ==

The start time shown on a facility row may be edited directly.

After an edit, later blocks on that facility may ripple from the changed event.

This allows the Meet Director to resolve collisions or adjust the actual operating sequence of a pit, ring, or runway.

== Field flights in Facilities view ==

When a field event has multiple flights, the individual flight competition times may be displayed.

The row may show information such as:

* Flight number
* Approximate number of athletes
* Competition start
* Check-in

The flight structure is generated by the schedule engine rather than being independently re-created by the display.

== Focus on group ==

Where combined-event chains or other linked groups use several facilities, the Facilities view may provide a '''Focus on group''' control.

Selecting a group reduces the display to the facilities relevant to that group and helps the Meet Director follow its movement through the venue.

== Schedule items ==

The Meet Director may add non-competition items to the Track or Field schedule.

Select:

'''＋ schedule item'''

Torunit asks for:

* Schedule item name
* Duration in minutes
* Optional fixed start time

Examples:

* Opening Ceremony
* National Anthem
* Lunch Break
* Awards
* Track Maintenance
* Officials Meeting
* Presentation

If no fixed start is entered, the item may flow with the schedule.

If a fixed start is entered, the item is pinned to that time.

== Editing a schedule item ==

A custom schedule item may have its duration edited later.

== Deleting a schedule item ==

A custom schedule item may be removed from the schedule.

Deletion removes the custom item, not the surrounding competition events.

== Borderline heat-size decisions ==

Torunit may identify a division that sits just above the normal heat capacity.

In that case the Meet Director may be asked whether to:

* '''Combine into one'''
* '''Split into two'''

This allows a human decision where the mathematical division falls near a practical operating boundary.

Once chosen, that decision should be retained rather than repeatedly re-decided by automation.

== Combining divisions ==

Some event blocks may allow multiple divisions to compete together.

This can be useful when small divisions can safely and legally share a heat.

A combined competition does not necessarily mean the divisions become one scoring or results division.

The competition may be operationally combined while results remain separated.

Human-created combinations should remain authoritative until deliberately changed.

== Heat and division details ==

Schedule blocks can contain a detailed breakdown of:

* Divisions
* Genders
* Athlete counts
* Heats
* Heat start times
* Hurdle configurations
* Field flights

This provides a more detailed operational view than the block's main event heading.

== Hurdle events ==

Hurdle blocks may display the actual hurdle configurations required by the athletes in the block.

Different divisions may require different:

* Race distances
* Hurdle heights
* Spacing
* Setup configurations

Torunit may include setup, transition, and teardown time as part of the block's true operational duration.

A warning such as:

'''distance TBD'''

means the applicable hurdle format has not been fully resolved.

== Throwing implements ==

Where available, throwing-event blocks may identify the applicable implement weights for the divisions in the block.

This can help officials prepare the correct implements and facility before competition.

== Holding ==

Any event block that does not yet have a valid place on the one-day schedule remains visible in '''Holding'''.

Nothing should silently disappear merely because it has not yet been scheduled.

The Holding area identifies blocks that still require placement.

Combined-event or linked-event chains may identify the first actionable leg separately from later dependent legs.

== LIVE and LOCKED ==

A day may display either:

* '''● LIVE'''
* '''● LOCKED'''

A live day remains connected to the schedule-generation process.

A locked day is intended to preserve authored Micro/Daily information rather than freely re-derive it.

The exact user-facing locking workflow should be confirmed before this distinction is treated as final documentation.

== Current implementation notes ==

The following items should be reviewed as Torunit development continues:

* The shared schedule-block template currently renders a ⚙ Block Settings button when a block has a permanent block UID, but the one-day Schedule page does not currently include the <code>openBlockSettings()</code> function used by that button. The gear therefore appears to be incomplete on Schedule.
* Decide whether the full block/division/heat settings system used by [[Micro/Daily Scheduler]] should also be available here. The shared block UI strongly suggests that is the intended design.
* Confirm the intended user control for the displayed LIVE / LOCKED state. The page displays the state, but the supplied Schedule file does not provide an obvious direct lock/unlock control.
* Verify the one-day Holding workflow and make sure every unplaced GDE always remains visible until deliberately resolved.
* Verify that all manual start-time, facility, division-combine, and borderline heat decisions persist through regeneration.
* Confirm that changing ANTICIPATED/REAL, heat gap, or field-flight policy preserves human placement while correctly rebuilding dependent calculations.
* Remove remaining internal “Schedule4” terminology from user-facing titles, comments, or labels where it escapes into the interface. The manual and public product name are simply '''Schedule'''.

== See also ==

* [[Participants]]
* [[Rounds]]
* [[Venue]]
* [[Macro Scheduler]]
* [[Micro/Daily Scheduler]]
* [[Combined Events]]
* [[Live Meet]]

[[Category:Meet Director]]
[[Category:Schedule]]
[[Category:Meet planning]]